![]() ![]() Unplug the device from the power source and remove the cover.Should you encounter an error message on your device, refer to the guide below for possible solutions. All custom settings will be deleted and will revert to the factory default settings when the reset switch is pressed. Refer to the graphic below to locate the reset button. Press the reset button with a pointed object to return all settings to the factory default settings. If a surge protector is not used and there is a power surge, your warranty may be voided.This article will describe the troubleshooting steps to resolve common issues ( factory reset, error codes, replacing the ink ribbon). Plug the device into a surge protector or uninterruptible power supply (UPS).If an extension cord is used, the marked electrical rating of the extension cord should be at least as great as the electrical rating of the device.Do not operate the device with a damaged cord or plug.For best operation, plug the device into its own electrical outlet.This time clock must be properly installed and located in accordance with these instructions before used.Read all instructions before operating.In order to reduce the risk of fatal electrical shockĪnd fire, basic safety precautions should be followed, including the following: Rating AC Adapter - I/P 120 VAC 60 Hz, O/P 12 V 2000mA Use only the supplied AC Adapter with this unit.The unit operates normally at temperatures of 5☌ (25☏) or below, but the print density and reaction of the liquid crystal display are inferior to those at normal temperature operation. ![]()
0 Comments
Leave a Reply. |